Determinación de la presión sonora radiada por pistones circulares y anillos no planos usando un método numérico simplificado

Although the study of the sound pressure radiation from membranes and plates is not new, current and future applications have produced a large body of recent research in the field. Several works have been published on the radiation from general plane surfaces and some particular geometries such as rectangular, circular, elliptic and annular. However, the case of sound radiation from non-planar axisymmetric rings that could be applied to the design of coaxial loudspeakers has not received much attention. In this article, a simplified numerical approach for determining the sound pressure radiated from symmetric non-planar pistons and rings is presented. The method can also include those cases having a radially-symmetric velocity distribution.     

Anisotropic sound and shock waves in dipolar Bose-Einstein condensate

We study the propagation of anisotropic sound and shock waves in dipolar Bose-Einstein condensate in three dimensions (3D) as well as in quasi-two (2D, disk shape) and quasi-one (1D, cigar shape) dimensions using the mean-field approach. In 3D, the propagation of sound and shock waves are distinct in directions parallel and perpendicular to dipole axis with the appearance of instability above a critical value corresponding to attraction. Similar instability appears in 1D and not in 2D. The numerical anisotropic Mach angle agrees with theoretical prediction. The numerical sound velocity in all cases agrees with that calculated from Bogoliubov theory. A movie of the anisotropic wave propagation in a dipolar condensate is made available as supplementary material.     

从光闪烁频谱反演大气湍流谱:原理与数值模拟

建立了一种数值算法,从光波在湍流大气中传播的闪烁时间频谱的高频特征反演大气光学湍流谱.此算法具有两点优越性:（1）反演出的湍流谱直接表征大气折射率的起伏而非大气温度场的起伏;（2）可以获得高空间波数、大部分位于耗散区的湍流谱,而用其它方法不易获得此区域的湍流谱.对Hill湍流谱以及一种复杂的湍流谱进行了大量数值模拟来检验此种算法,结果表明:如果知道大气风速与湍流内尺度就可以相当有效地获得湍流谱.     

连接阻尼对弹性杆纵向碰撞响应的影响

分析了刚度和阻尼并存的一般边界条件下线弹性杆与刚体的纵向碰撞过程,得到了碰撞后第一个波动周期杆振动的位移、速度和应力的解析表达式,讨论了碰撞持续时间为2倍杆长与波速比的条件.将导出的解析表达式通过具体的算例代入计算,讨论了不同质量比、不同连接刚度条件下连接阻尼对于碰撞过程中杆中质点速度及应力响应的影响.研究表明,连接阻尼改变了受碰撞弹性杆的振动模式,连接阻尼影响着碰撞反射波速度和应力的突变幅度;连接阻尼增大,杆中速度和应力响应分布变平缓:在连接刚度较大的情况下,连接阻尼变化对于杆中质点速度和应力影响较大;碰撞持续时间与质量比、连接刚度、连接阻尼及杆长有关,与碰撞的初速度无关;在质量比较大的情况下,连接阻尼使得反射波到达杆碰撞端时,杆端的应力有显著的变化.     

非均匀部分相干光束在自由空间中的传输

本文介绍了非均匀部分相干光束的概念, 并用数值模拟的方法详细研究了其在自由空间传输后的变化. 研究结果表明, 经过自由空间传输后非均匀部分相干光束会发生不同于传统相干模型光束的显著变化. 这种变化和光束传输距离、光源空间相干度分布、光源光强分布密切相关. 经过传输后, 源平面自相干附近点的空间相干度发生突变, 在短距离传输过程中源平面高相干区域的空间相干度会降低, 接收面各点的空间相干曲线不再相同, 随着传输距离增加, 非均匀空间相干度会逐渐趋于均匀.     

S波段微波热致超声成像系统研究

微波热致超声成像技术通过向物体发射微波脉冲, 导致物体吸收电磁波温度迅速升高, 产生瞬时压力波, 从而激发产生超声波信号, 通过传感器对产生的超声波信号进行采集并成像, 最终还原了反映物体吸收电磁波能量特性的图像, 由于此方法兼具了微波成像的高对比性和超声成像的高分辨率特点, 理论上验证了热声成像技术对早期乳腺肿瘤检测的可行性. 本实验兼顾系统成像深度和分辨率, 采用S波段的微波脉冲信号源对物体进行辐射, 利用圆形扫描方式对待测物体进行检测, 同时为了更好的验证成像性能, 本实验同时使用了肿瘤仿体及实际生物组织进行成像实验. 通过实验分析, 验证了该系统对肿瘤仿体和生物组织检测的有效性, 以及系统的高分辨率和高对比度特性, 为早期乳房肿瘤检测提供了进一步的理论支撑.     

A finite element method based comparative fracture assessment of carbon black and silica filled elastomers: Reinforcing efficacy of carbonaceous fillers in flexible composites

This study is focused on numerical investigation on fracture behaviors of carbon black (CB) and silica filled elastomeric composites. Finite element analysis (FEA) in compliance with multi-specimen method is used to calculate J-integral and geometry factor of the rubber composites up to a displacement of 20 mm for single edge notch in tension (SENT) and double edge notch in tension (DENT) specimens. An empirical relationship between crack tip opening displacement (CTOD) and crack advancement is established depending on notch to width ratio (NWR). The stress contours across the notches for SENT and DENT specimens is discussed briefly. It is found that fracture propagation resistance of CB filled elastomer is 125% more than that of silica filled elastomer. Although, Silica filled elastomer have good tensile strength and crosslink density but it fails to replace carbon black in terms of fracture properties. The critical J-integral for CB filled elastomer is 18.7% and 32.2% more than silica filled elastomer for SENT and DENT specimens respectively. The effect of specimen type on various fracture properties is also explored. The factor of safety is found to be significantly more in case of CB filled elastomers making them less vulnerable to crack propagation and catastrophic failure.     

On the use of some numerical damping methods of spurious oscillations in the case of elastic wave propagation

The use of finite element and finite difference methods of spatial and temporal discretization for solving structural dynamics problems gives rise to purely numerical errors. Among the many numerical methods used to damp out the spurious oscillations occurring in the high frequency domain, it is proposed here to analyse and compare the well-known Bulk Viscosity method, which modifies the stresses calculations and a method recently presented by Tchamwa and Wielgosz, which is based on a modification of an explicit time integration algorithm. The efficiency of both methods is evaluated in a 2-D axisymmetric compressive test.     

基于和积和最大积的信念传播算法的收敛性分析

在介绍马尔可夫网络和标准信念传播(Belief Propagation,BP)算法的基础上,以具有4个隐含结点的无环马尔可夫网络为例,详细分析了基于和积和最大积的BP算法收敛性,结果表明,在网络为无环马尔可夫网络时,基于和积的BP算法收敛于全局最优解,而基于最大积的BP算法在任何初值条件下,只要经过有限次迭代,BP算法必收敛到唯一固定点,若算法有唯一最优点,则此固定点为最优点.以实证分析为工具,研究BP算法收敛性,可作为BP算法基础理论研究的一次有益尝试.